Are your Structural Drying services available in Tempe?

Yes, COS Water Damage Restoration provides round-the-clock Structural Drying services directly in Tempe, AZ.

How much does emergency service cost in Tempe?

We offer upfront, transparent pricing with no hidden fees for all service calls in Tempe.

Structural Drying in Tempe, AZ | 24/7 Local Service

Name: COS Water Damage Restoration
Telephone: +1-844-499-0972
Price range: $$

Why Choose Us

What Separates Professional Structural Drying in Tempe from Surface Drying

Structural Drying is a science-driven process built on thermodynamics, psychrometrics, and equipment calibration — not fans pointed at a wet floor and checked weekly. Here's what our Tempe team brings to every structural drying project that ensures complete, documented results.

🌊

LGR Dehumidification

Undersized or generic dehumidification is the most common technical failure in Tempe drying projects.

📈

Daily Psychrometric Records

Documented daily readings are what separate a professional drying program from a rental dehumidifier in the corner.

🏠

Wall Cavity Drying

Wall cavity drying is where most post-loss mold in Tempe properties originates. It's where we focus.

📋

Insurance-Formatted Reports

COS Water Damage Restoration's Tempe drying technicians generate moisture logs formatted specifically for insurance claim submission — daily readings at sensor point locations mapped to a floor plan, equipment placement and settings recorded, and final confirmation readings that document the completion of the drying program. Xactimate-compatible line items for each day's equipment and labor make the drying scope transparent to your adjuster and minimize the chance of a supplement dispute on the drying phase of your claim.

Services

Our Tempe Structural Drying Scope

Here are the specific drying scenarios and assembly types our Tempe team is equipped and trained to handle.

🏠

Wall Framing & Drywall Cavity Drying

The most common drying failure in Tempe water damage projects is a wall framing cavity left with elevated moisture content after surface materials are dry. Our Tempe team uses calibrated cavity access — typically 1-inch drill holes at the base of the wall framing cavity — to introduce directed airflow from high-velocity air movers into the stud bay, paired with LGR dehumidification to extract the evaporated moisture. Moisture readings at framing sensor points confirm completion. Access ports are patched and filled after the program completes, typically leaving no visible trace of the access procedure.

🧱

Subfloor & Hardwood Assembly Drying

Subfloor assemblies — OSB or plywood sheathing over floor joists — and hardwood flooring systems require targeted drying approaches because of their density and their tendency to cup, buckle, or swell when dried too aggressively or left wet too long. Our Tempe drying crew evaluates hardwood flooring species and moisture content before recommending drying-in-place versus removal, and when drying in place is appropriate, we use floor drying mats that direct conditioned air against the top face of the hardwood under controlled pressure — accelerating evaporation while minimizing the differential drying stress that causes cupping.

🔮

Crawlspace & Below-Grade Drying

Crawlspace drying in Tempe properties is complicated by limited access, typically poor natural ventilation, and the presence of vapor barriers that may trap moisture against wood framing. Our Tempe below-grade drying team is equipped with compact high-velocity air movers that fit through standard crawlspace access hatches, portable LGR units configured for below-grade operation, and moisture meters suitable for sub-surface readings at joist and beam locations. Vapor barrier condition is evaluated and re-secured after drying if disturbed during the process.

💨

Ceiling & Overhead Assembly Drying

Ceiling assembly drying is one of the more technically demanding aspects of water damage restoration in Tempe structures.

🏛

Commercial & Multi-Room Drying Programs

Large-scale commercial drying in Tempe is project-managed from day one with zone-specific reading logs.

🔏

Mold Prevention Monitoring

Mold prevention is not a separate service — it's built into every Tempe structural drying program we run.

Professional Structural Drying technician working in Tempe, AZ

24/7 Emergency Structural Drying experts in Tempe, AZ

Reviews

Tempe Customers on Our Structural Drying Service

★★★★★

"The most important thing about COS Water Damage Restoration's Tempe structural drying was that they explained the readings to me every single day. I understood what the numbers meant, what the target was, and how far we were from completion. By day six I was watching the moisture content readings in our wall framing drop from 28% to 11% and understood exactly what was happening and why. That level of transparency is what you need when your home is full of drying equipment for a week."

K. Yamamoto

Verified Tempe, AZ Customer

★★★★★

"Our insurance adjuster was skeptical about the drying scope initially, but COS Water Damage Restoration's documentation — the daily moisture logs, the floor plan with sensor point locations, the before and after readings — was thorough enough that the adjuster approved the full scope without any back-and-forth. That documentation is worth its weight in the claim settlement alone."

O. Delacroix

Verified Tempe, AZ Customer

★★★★★

"We had a particularly complex drying project across three floors of a Tempe office building after an upstairs pipe event. COS Water Damage Restoration managed the zone readings, adjusted equipment as the drying progressed on different floors at different rates, and wrapped the entire building within 11 days with full documentation. That's professional-grade project management."

H. Bergstrom

Verified Tempe, AZ Customer

FAQs

Common Questions — Structural Drying in Tempe

How long does Structural Drying take in Tempe?

Structural drying timelines in Tempe vary based on material type, saturation level, ambient conditions, and the assembly configuration of the affected area. A well-managed drying program using properly sized LGR equipment and daily monitoring typically runs 3-7 days for standard wall and floor assemblies, 5-10 days for wall cavity and subfloor assemblies with significant saturation, and longer for dense structural assemblies such as hardwood over concrete or multi-layer floor systems. Your Tempe project manager provides a realistic range at the initial moisture mapping session and updates it daily based on the actual readings.

What is the target moisture content for structural drying in Tempe?

Equilibrium moisture content (EMC) targets depend on the material being dried and the ambient conditions in Tempe. For softwood framing (the most common structural material), industry standard targets are typically 6-12% moisture content. For hardwood flooring, targets adjust based on species and acclimation moisture content for the ambient conditions in your property. Drywall targets are measured separately by core readings. Your Tempe drying crew documents the target range for each material in the project file and confirms completion when all readings fall within range.

Can drywall be dried in place during Structural Drying in Tempe?

Standard gypsum drywall can sometimes be dried in place if: the water source was clean (Category 1), the saturation period was short (less than 24-48 hours), the drywall face paper is intact and not delaminating, and cavity moisture readings from the wall behind indicate manageable saturation levels. When these conditions are not met — particularly with Category 2/3 events or extended saturation — removing the drywall and drying the framing directly is both more effective and safer from a mold risk standpoint. Our Tempe team evaluates each wall section individually and documents the decision in the written scope.

What are psychrometric readings and why do they matter for Tempe drying?

Psychrometrics is the study of air moisture relationships. In a drying program, psychrometric readings measure the temperature and relative humidity of the air in each drying zone, from which we calculate the specific humidity (grains of water per pound of dry air) and the dewpoint temperature. These calculations tell us how much moisture the air is holding relative to its capacity, and how efficiently the LGR dehumidification equipment is removing moisture from the air space. Combined with direct moisture content readings in structural materials at fixed sensor points, psychrometric data gives us a complete picture of the drying system's performance — and tells us when the drying program is genuinely complete, not just visually complete.

Will COS Water Damage Restoration provide drying documentation for my insurance claim in Tempe?

Yes — daily psychrometric logs, moisture content readings at sensor point locations mapped to a floor plan, equipment placement and settings records, and a written drying completion report are all generated by our Tempe team and provided for your insurance claim file. Our drying documentation is formatted to match what insurance carriers request for the drying phase of water damage claims, which reduces the likelihood of a documentation-based supplement dispute.

Can I stay in my Tempe home while structural drying equipment is running?

Yes — in most cases, you can remain in your Tempe home while structural drying equipment runs. The equipment creates noise and slightly elevated temperatures in the affected areas, and the ambient humidity in the drying zones drops significantly during the program. Our Tempe team will walk you through what to expect during the active drying program: which areas will have equipment, what the noise and temperature conditions will be like, and what household activities (opening windows to outside humidity, running a home humidifier) should be avoided during the drying cycle.

Service Area

Structural Drying Coverage — Tempe and AZ

COS Water Damage Restoration's Tempe structural drying team serves Tempe and surrounding communities throughout AZ. Daily monitoring included. Call +1-844-499-0972 to get started.

Tempe (/tɛmˈpiː/ tem-PEE; Oidbaḍ in O'odham) is a city in Maricopa County, Arizona, United States, with the Census Bureau reporting a 2020 population of 180,587. The city is named after the Vale of Tempe in Greece. Tempe is located in the East Valley section of metropolitan Phoenix; it is bordered by Phoenix and Guadalupe on the west, Scottsdale and the Salt River Pima–Maricopa Indian Community on the north, Chandler on the south, and Mesa on the east. Tempe is also the location of the main campus of Arizona State University.